Heat Exchanger
This heat exchanger example illustrates the multiphysics modeling capabilities of FEATool. The model consists of a series of heated pipes surrounded by a fluid at a lower temperature, and features effects of both free and forced convection. Two types of physical phenomena are considered, fluid flow which is modeled by …
Heat Transfer in a Ceramic Strip
Two dimensional heat transfer of a ceramic strip with both radiation and convection on the top boundary. The ceramic has a thermal conductivity of 3 W/mK and the sides are fixed at a temperature of 900 °C while the bottom boundary is insulated. The surrounding temperature is 50 °C. The top boundary is exposed to both …
Resistive Heating in a Tungsten Filament
This example models resistive Joule heating where the resulting current from an applied electric potential will heat a thin spiral shaped Tungsten wire, such as can be found in incandescent light bulbs. The filament reaches an equilibrium temperature where the internal heat generation is balanced by radiative heat loss …
Shrink Fitting of an Assembly
This example models shrink fitting of a two part assembly. A chilled tungsten rod is inserted into a slot in a heated steel frame. The rod can be fitted due to thermal expansion of the frame, and when the assembly reaches equilibrium temperature the two parts will be joined due to the ensuing pressure fit. The model …
Transient Heat Diffusion in a Rod
This example is a classic one-dimensional transient heat diffusion problem where a solid rod of unit length is kept at fixed temperature at the right end, T = 25, and losing heat from a constant outward heat flux qn = 1 at the other end. After the simulation the computed results can be compared with the analytic …